BKEB 110 Can be used to create a flush duct termination or a reduction. Prevents sliding of the cover. floor duct end-plate, height = 110 mm BKEB 110-10S BKEB 110-15S BKEB 110-20S BKEB 110-30S BKEB

BKAA 110 From a width ≥ 300 mm, one separating strip must be installed. From a width of ≥ 500 mm, two separating strips must be installed. floor duct attachment branch, height = 110 mm BKAA

floor duct crossing for horizontal change of direction with integrated connectors

BKBG 100 From a width ≥ 300 mm, one separating strip must be installed. From a width of ≥ 500 mm, two separating strips must be installed. floor duct bend with mitre cut, height = 100 mm BKBG

BKGL 100 From a width ≥ 300 mm, one separating strip must be installed. From a width of ≥ 500 mm, two separating strips must be installed. floor duct with mitre cut, left, height = 100 mm BKGL

BKVAA 100 From a width ≥ 300 mm, one separating strip must be installed. From a width of ≥ 500 mm, two separating strips must be installed. floor duct attachment branch, variable, height = 100

BKBR 100 From a width ≥ 300 mm, one separating strip must be installed. From a width of ≥ 500 mm, two separating strips must be installed. floor duct bend with radius, height = 100 mm BKBR

floor duct branch as T-piece with integrated connectors

BKGLDR In compliance with the installation specifications and a maximum compartment size of 200 mm, the cover guarantees a tested load capacity of at least 500 kg according to EN 50085-2-2. floor

BKGRDR-RHP The cover consists of a 2 mm thick galvanized sheet steel with 1 mm non-slip embossing and slip resistance R12 according to DIN 51130. In compliance with the installation specifications